For questions or more information about any of our products and services, please email or call us at 877-843-0183.
We are experts in convenience store design and walk in coolers.
As convenience store design consultants, we can assist you!
EPS (Expanded Polystyrene) Vs Polyurethane. You Decide??
Polyurethane is a new product with roughly 35 years of testing. Expanded Polystyrene has been used for approximately 50 years. Polyurethane has been developed to alleviate the shortfalls of EPS.
R- Value-Polyurethane is the most efficient manmade insulation in the world. Polyurethane can be found in most refrigerators, freezers, and in some high end personal coolers. When calculated Per inch of insulation, polyurethane has no equal. The walk in coolers and walk in freezers that we distribute are made of polyurethane. EXPANDED
- POLYSTYRENE has a R-value as high as R-5 and as low as R-2 per inch.
- POLYURETHANE HAS AN R-VALUE as high as R-7 and as low as R-8 / INCH.
So How does this affect you when buying a Walk In Cooler. Operating Cost!!! You will save money in the initial investment However You will Spend Much More Money in Energy Consumption. Low efficiency equals Higher Operating Cost!
Moisture Resistance - moisture resistance is a very important factor. Moisture causes mildew, mold and once panels become saturated it causes problems with efficiency. Polyurethane has the lowest moisture Permeability ratings of any product manufactured; Polyurethane is number one in the building industry today.
- Polyurethane Permeance rating is 1.2.
- EPS Permeance rating on is 2.0 to 5.0
So what does this mean for the Owner Operator? As you use this walk-in it is subjected to moisture introduced through Dew Point and Moisture increased in the working environment Polystyrene Absorbs water more readily than does Polyurethane Resulting in Lowered Efficiency over the Life Span of the Product.
Fire Resistance - We distribute panels that contain UL Class 1 rated polyurethane foam. The UL Class 1 Rating Means that the polyurethane contained within the panel is not a source for fire. Polyurethane will not burn on its own, in fact when left to burn the fire will extenguish itself. A UL Class 1 rating is the highest rating a building product can obtain. Polyurethane is better defined as a thermal-set plastic, which means this product will not melt at temperatures below 1000 degrees. Expanded Polystyrene on the other hand will soften at 180 degrees and it will melt at 240 degrees. You Be the judge!!
So what does this mean for the Owner Operator? You can possibly reduce your insurance cost and you will not need to use sprinklers inside our walk in coolers! Another Added Value!!
- Polyurethane Does Not melt at temperatures below 1000 deg do not affect the product
- Styrene melts at 240 degrees Temperature
DENSITY - Density determines the strength of a product
A simple comparison would be to take a disposable portable cooler from your local convenience store and stand on it. Then stand on a Coleman Ice Chest Advantage polyurethane.
- The density of EPS is 1 lb.
- The density of Polyurethane is 2.2lb.
- Most adhesive chemicals will not affect Polyurethane. Expanded Polystyrene will react violently to petroleum based products and liquid nail which will burn thru EPS.
MANUFACTURING - One of the biggest differences between EPS and Polyurethane is in the manufacturing
walk in cooler panels. Both products are encased by an outer layer of wood, metal or fibre glass however, this is
where the similarity ends.
Polyurethane bonds itself to the outside covering of the panel by its own adhesion process. Polyurethane is one of the best glues used in the industry today. On the other hand Expanded Polystyrene is glued to the outside wall panel coverings and may or may not achieve adhesion.
- Polyurethane provides Excellent Adhesive
- Polyurethane provides Excellent R-Factor
- Expanded Polystyrene must be glued to the substrait
Expanded Polystyrene is a marginal Insulator
In layman's terms if you want a cheap alternative with reduced efficiency, marginal structure and increased fire dangers Polystyrene EPS is your solution. On the other hand if you want to purchase a product that pays you back in efficiency and longevity Polyurethane is your answer!
The age-old proverb is still true today. YOU GET WHAT YOU PAY FOR.